Quality………. is our Promise
- Weight3,900 lbs
- Fuel Capacity130 gallons
- Max HP500
- DeadriseEntry 55°/Transom 22°
Here at KenCraft Boats, we have been working on a new Challenger 25 design for the better part of a year and we would like to announce on the site that the finished product should be available soon after the first of the year. This new model will replace the Challenger 240 which is no longer in production.
We have been working with Vectorworks Marine and Naval Engineering to design what we feel is the perfect marriage of a true offshore fishing platform with a creature comfort family cruising boat that the entire family can enjoy out on the water. This attention to detail makes our boats different from every other builder because we sweat the small things that both a fisherman and a family want to see in today’s boats on the water. As with all of our boat lines, you really can have a fishing boat that will satisfy the family as a weekend cruiser.
The Challenger 25 incorporates a sharp deadrise at the transom and the bow for those rides offshore in rough water, yet the family safety is not forgotten with our signature high freeboard at the amidships as well as the stern of the boat. Of course, the traditional Carolina Bow Flair is there like all of our Challenger boats. For additional safety, we will have a wraparound handrail recessed inside the forward fish/storage boxes.
The drawings you see below will show the general layout of the Challenger 25 and how we designed the forward seating to not interfere with the fisherman, as it allows easy 360 degree walking around the interior while fighting that fish. There is a 5’ long fish box/storage box in the floor forward of the console which will hold either your large fish or your island chairs for the cruise. Forward seating boxes are fully foamed and drain overboard while also being able to store your very large fish. We have a livewell in the rear Euro transom that holds 32 gallons and for the fisherman that needs more, we offer an optional live well leaning post that will hold approximately 45 additional gallons. There will be a fold down bench seat in the rear as well. The fuel tank is currently at 130 gallons.
The walkdown console will have almost 6’ of headroom and will house the batteries on a built-in shelf that is part of the console and not under your feet when you are inside the console. Bilge access is through an in-floor hatch that is guttered to drain to the overboard scuppers to help keep the bilge dry. All water on the deck will drain via the transom door and not through in-floor scuppers like most competitors. This means any water you might take in the boat from an unexpected wave, will quickly and safely escape out the back of the boat much faster than in floor drains; a true self-bailing boat.
We will release more information as we complete the Challenger 25. Feel free to reach out to us at the factory if you have any questions and we will be glad to help you in any way possible.
Build Your Boat
Our facility consists of over 52,000 square feet of modern manufacturing space that occupies 5 acres of land. Come take a tour of our plant and see how we build our boats to last you a lifetime. Contact one of our many dealers to begin enjoying the water.